Skip to main content

Part Number: 6470

Phoebe LED 5ft Batten 30W Lykos Microwave Sensor 120° Diffused

Part Number: 6470

Phoebe LED 5ft Batten 30W Lykos Microwave Sensor 120° Diffused

Shape: Batten

Batten

Power Consumption: 30W

30W

Brightness: 3000lm

3000lm

Dimmable: No

No

£74.22 inc. VAT

FREE UK Delivery on orders over £50 (Standard delivery, excludes orders of oversized items)

    • Glass Type: Diffused
    • Rated Life: 50,000 hours

Phoebe LED 5ft Batten 30W Lykos Microwave Sensor 120° Diffused

  • Power Consumption: 30W
  • Dimensions: Width=80mm Depth=72mm Length=1500mm

The Lykos 5ft integrated LED batten light has been designed as a direct replacement for single T5 and T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops and food preparation areas which require tough, weatherproof fittings.

The integrated microwave and dusk-til-dawn sensor automates the lighting function of the fitting when the presence of motion is detected. With sufficient ambient light, the batten will not switch on even when motion is detected. When there is insufficient ambient light the fitting will switch on when motion is detected - after the hold time has elasped the light will switch off if no more motion has been detected. The sensor has easy access to adjust daylight threshold settings, hold time (up to 30 minutes) and sensitivity of detection. The sensor can be overridden by swtiching the power to the fitting on/off 3 times.

This Lykos single LED batten light comes with a 30W integrated LED strip with a 50,000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs.

The tri-proof fitting is constructed from an IK08 impact rated moisture and acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor and outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof.

Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting.

Another great feature is the colour changing technology (CCT), which allows you to select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation.

The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting.

Attribute Value
MPN 14701
Barcode 5055579314701
Technology LED
Shape Batten
Dimmable No
Manufacturer Phoebe LED
Voltage 240V
Power Consumption 30W
Dimmability No - Not Suitable for Dimming
Total Lumens 3000lm
Beam Angle 120°
Colour Temperature 3000K and 4000K and 5700K
Glass Type Diffused
Warm Up Time <0.5 seconds (0-60%)
Ingress Protection Rating IP65
Average Rated Life (L50) 50,000 hours
Switching Cycles 100,000
Width 80mm
Depth 72mm
Length 1500mm
Estimated Running Cost £7.87 per year (based on 5-hours per day)